Technical Specifications    

1. Mechanics
-Cast aluminum housing, enclosure rated at IP 66
  (NEMA 4, NEMA 12)
-Weight: 9 kg (approx 20 Ibs)
-Adjustable mounting foot with an 18 mm diameter hole
-Dimensions: see diagram below

2. Optics

     Angle

Model	Explored angle
TS 2016 TS 2036 TS 2056	10 degrees 30 degrees 50 degrees

• Spectral sensitivity: photocell, range from 1 to 3 µ , with maximum sensitivity at 2.2 µ
• Range of material temperature: dependant on the material to be detected

  For iron and steel:
  - from 400 °C (750 °F)
    with the ordinary sensitivity type
  - from 250 °C (480 °F)
    with the high sensitivity type.

NOTE: When the temperature of the product is expected to always exceed 400°C (750°F) it is not advisable to use the high sensitivity model, as it might detect the scale or reflections. For other materials such as copper, brass, alloys, glass, etc., the temperature range is dependant on the product’s infrared emissivity. Consult the factory for these products.

• Optimal distances between the sensor and different products:

Wire 5 to12 mm Small bars 10 x 10 mm              to 40 x 40 mm Billet and small beam Bloom Strip Sheet Heavy plate Slab

0.20 to 3 m 0.20 to 4 m     0.50 to 6 m over 2  0.60 to 2 m 1.00 to 6 m 1.00 to 8 m over 2 m

     

Home        Up        Request More Info

© Copyright 2000 Delta.  All Rights Reserved.     
Email:  info@delta-usa.com