Features

• An adjustable mounting stand
• A cooling jacket with embedded stainless steel cooling coil. The jacket, which is independent of the opto-electronic case, includes all the fluid supply connections. The independent jacket allows the detector to be demounted without first disconnecting the fluid supplies or changing the optical alignment.
• A protective hood, hinged for cleaning of the detector window, includes an air purging system and adjustable aperture shutters.
• Direct sighting through the detector enables precise orientation.
• The scanning angle (10°, 30° or 50°) is shown on the case.

• A photocell particularly suited to detection at low temperatures or in the presence of water vapor.
• Remote control of two sensitivity ranges
• A 15-pin, plus earth, connector. The detector is supplied with the mating connector mounted on a cable (standard length: 2 m).
• All the electronics on a single plug-in circuit board.
• A control panel beneath a protective hinged cover at the rear
• of the detector providing:
  – Viewfinder
  – "Test" push-button for simulation of a product
  – Two sensitivity adjustment potentiometers (one for each range)
  – A tri-color LED indicating:
  off: malfunction
  green: product absence
  red: product presence
  orange: signal saturated

3. Self monitoring

Alarm:
– monitoring of the internal temperature of the detector (maximum 55°C/130°F) indicating any fault in the cooling syste.
– monitoring of the power supply and of the scanning

Control:
Automatic control of the sensitivity for different products and monitoring of the detection circuitry providing an indication of:
– dirty aperture glass
– the position of the sensitivity range switch

Home        Up        Request More Info

© Copyright 2000 Delta.  All Rights Reserved.     
Email:  info@delta-usa.com